|
Cross Wind Speed Units are incorrectly labeled on Trajectory Printout
Affected versions: 5.0.1, 5.0.2, 5.0.3
Description:
The top portion of the Trajectory Results printout lists the input values for each trace. The Cross Wind Speed units on the printout are incorrectly shown as ft/sec (see example below). The correct units should actually be mph.
This issue does not affect any calculations or results. It is only incorrectly labeled on the printout.
How to correct: This issue will be corrected in the next release of Load From A Disk.
Notes: None.
|
Home Features Demo Order Tech Support Field Results News & Reviews Web Links What Is Ballistics? Contact Us!
|
